CyberPi series products are design with special appearances, such as holes, through-holes, pins, and tapped holes, which enable them to be extended with other parts or components.


Appearance design

Description

CyberPi

image.png

Holes on the back, used to:

  • connect to extension boards
  • connect to Lego blocks or Makeblock M4 metal parts through pins

Pocket Shield

image.png

Pins on the front, used to connect to CyberPi

image.png

Holes and a tapped hole on the back.

  • The holes are used to connect to Lego blocks or Makeblock M4 metal parts through pins.
  • The tapped hole is used to connect to Makeblock M4 metal parts through screws.

mBuild modules

image.png

Through-holes, used to connect to Makeblock M4 metal parts through pins or screws or Lego blocks through pins



The following provides some common connection examples:

Example 1: CyberPi + one beam + two pins

image.png

Example 2: CyberPi + one cut board + two pins


image.png

Example 3: Pocket Shield + one T-shaped plate + one M4 x 14 screw

image.png

Example 4: CyberPi + Pocket Shield + one T-shaped plate + two beams + five screws

image.png


For more information about Makeblock metal parts, see Mechanical Parts on Maker's Platform.